When the weather starts to get colder and the nights draw in, you want to know you have a boiler you can rely on. You want to ensure you’re keeping your family safe with simple boiler tips while efficiently keeping your home warm and comfortable.
If your boiler will be in peak working condition for the winter, then it’s important to perform a few checks throughout the year to make sure it’s in good working order. Here are some things you should be on the lookout for. And as with any complicated home maintenance, make sure you hire a professional with sufficient hvac training, so the repair is done right the first time.
Use Your Boiler Regularly
You probably won’t need your heating year-round, but you should ensure you turn it on every once in a while. This is because when you’re not using your boiler, it can start to clog up, and you don’t want to turn it on to find it’s not working when you most need it.
In the run-up to winter, make sure to turn your system on for around 20-minutes a day, making sure it’s in working order before the cold winter months.
Annual Maintenance
Your boiler is an important part of your home. Without it, you’ve got no heat, and as everyone knows, a cold home isn’t nice. If you’re looking to replace your boiler for a more efficient heating system, then consider switching to ground source heat pumps. When a heat pump is installed properly by professional ground source heat pump installers, it can deliver up to three times more heat energy to a home than the electrical energy it uses.
A problem with boilers is that we don’t use them so much through the summer, and then suddenly, we’re expecting them to do a ton of work in the winter. As a result, they need maintenance, and if you want yours to work in top order, then speak to gjsplumbingandheating.co.uk about your annual maintenance.
Bleed Radiators
Bleeding your radiators might sound complicated, but it’s actually very easy to do, and it can make a difference to your boiler.
As you use your radiators, air pockets can build up, causing a loss of efficiency. This will mean your radiators won’t put out the same amount of heat, which costs more to keep your house warm.
Regularly bleeding your radiators will release trapped air bubbles, allowing your boiler to do its job more efficiently.
Keep an Eye on the Pressure Gauge
The pressure gauge gives you an insight into how your boiler is performing. Boilers that are functioning well should generally show a pressure level of between 1 and 1.5 bar.
Low pressure might mean a leak somewhere in the system, whereas high pressure may indicate that maintenance needs to be done.
It’s not something you have to be checking all the time, but every once in a while, it’s worth noting your boiler’s pressure.
Check for Leaks
Leaks around the house are obviously a bad sign, so make sure you’re keeping an eye out for them and take action by hiring a plumber if you do find any. If you let leaks continue, then they not only have the potential to ruin your house with damp, but they may also damage your boiler system further.
Your annual maintenance should help to protect you as much as possible from leaks, but it’s always worth being attentive and watching out. The quicker you spot these issues, the quicker you can have a service, and this can end up saving you money.
Last Updated on June 22, 2023 by Lucy Clarke